How to install recessed lights

There are various styles of recessed lights, so there are differences in the installation methods, but the general steps can still be used for reference. Let's understand the installation method and disassembly method of the embedded ceiling lamp.

How to install recessed lights

1. According to the installation position of the embedded ceiling lamp to be installed, open a square hole or a round hole in the ceiling installation position where the embedded ceiling lamp will be installed. Note that the area of ​​the hole should be equal to the recessed ceiling lamp, and the installation position of the lamp must be determined to facilitate the installation of the recessed ceiling lamp.

2. When installing, first install the mounting clips on the lamps on both sides, and install the clips on both sides of the lamps and install the lamps in the square or round holes.

3. Connect the power cord, cover the wiring cover and tighten with screws. The number of bolts for fixing the lamp holder should not be less than the number of fixing holes on the base of the lamp, and the diameter of the bolts should match the hole diameter; lamps without fixed mounting holes on the base. If there is no fixed installation hole on the base, you can punch it by yourself to fix it. The bolts or screws used to fix each lamp should not be less than 3, and the center of gravity of the lamp should be consistent with the center of gravity of the bolts or screws.

4. Put the lamp and fix it, double retract and hold the circlips on both sides of the luminaire and put it into the ceiling opening, the inner circlips against the ceiling, hold the mask with your hand and push it up and tighten it.